M2s4 specs austin

images m2s4 specs austin

Along with this I will be installing spacers on top under the front radiator support bar to allow this JVT Racing Aluminum Radiator to fit ok. View Photo Gallery 22 Photos. Comment 0 Photos 9 Share. But not low enough where it will start rubbing again. You will have to trim the front radiator support bar, so that you are able to put the cap on. Bought 2 seals, along with a dowel pin that was missing, the breather cap, and the 2 washers which I'll replace when I fill the tranny back up with Honda MTF. Sent out the OEM flywheel to get shaved. Anyway I decided to jump on the H22 bandwagon.

  • Spec's Wines Spirits and Finer Foods in Houston, Austin and More
  • Liquor, Beer & Wine Store At N Mopac Expy In Austin, TX Spec's Wines, Spirits & Finer Foods
  • Liquor, Beer & Wine Store At RR N In Austin, TX Spec's Wines, Spirits & Finer Foods
  • m2s4 prelude si trans CB7Tuner Forums

  • With more than locations across Texas, family-owned Spec's carries thousands of wines, spirits, craft beers, gourmet goods and accessories. pretty much what the title is i have a chance to get one or the other for the same price, the f4 has better gearing but iv heard that the s4 has lsd?. Longer gears=better fuel economy on the highway.

    Video: M2s4 specs austin Spec's Liquor Warehouse!

    Also means slightly slower acceleration. I went from a M2F4 to a H2U5 and got Mpg.
    I'm still running the car's stock one for the B21 : Also, did get that powersteering leak fix. Without them, I definitely would not have enjoyed this build as much as I have.

    images m2s4 specs austin

    Well it finally arrive. It is not fully install, I just made a trial run and test fitted it because alot of people online say these have fitment issues And the rear mount was good too.

    Spec's Wines Spirits and Finer Foods in Houston, Austin and More

    Made the wires longer. Side by side to a stock one, you can start seeing that it IS a little bigger.

    images m2s4 specs austin

    images m2s4 specs austin
    Mattress tester key and peele black
    It will be going back lower. So lately I've been piecing together some parts. Falken Tire.

    Liquor, Beer & Wine Store At N Mopac Expy In Austin, TX Spec's Wines, Spirits & Finer Foods

    Sponsored Links. But if you do have a personality and you tend to bathe on a regular basis, then it could be due to the urban legend commonly referred to as "The Prelude Curse.

    Load Post 9. Had to order a few parts from honda.

    Check out netzyo93 Honda Prelude in Eastern,NC for ride specification, modification info and photos and follow netzyo93's Honda. B - Drivetrain: 1 - stock M2S4 tranny with MFactory final drive.

    Liquor, Beer & Wine Store At RR N In Austin, TX Spec's Wines, Spirits & Finer Foods

    2 - No LSD. 3 - Modified axels. 4 - PSPEC short throw shifter. 5 - Fidanza. The slushbox was promptly replaced with an H23 Prelude's manual transmission and beefed-up with an ACT Heavy.

    m2s4 prelude si trans CB7Tuner Forums

    H23 M2S4 transmission.
    Got it back and starting putting things together. Also, if you'll want to use your original fan, you'll have to trim the plastic there where the hose connects, you can see that it'll be in the way. Now's it's been almost a year now, officially. Well it finally arrive. Except not much movement with the bolts in.

    images m2s4 specs austin
    M2s4 specs austin
    You can see that the Bar is right infront off and under the filling hole.

    images m2s4 specs austin

    I especially have to thank my girlfriend, Mimi, for stepping up to the plate with me and tackling each challenging moment. Load More Comments. So for my 26th Birthday I decided to get another.

    Video: M2s4 specs austin MVP Vodka @ Spec's - Austin,TX

    Exedy OEM replacement Clutch works for me. Prepare to be blown away. This is also true when it comes to building cars.

    5 thoughts on “M2s4 specs austin

    1. Sent out the OEM flywheel to get shaved. Its pretty tight down below, but not too much where it will be affecting anything.

    2. I raised it because it was way too low and it was rubbing a little bit in the front. Email: Required.

    3. Sent out the OEM flywheel to get shaved. I raised it because it was way too low and it was rubbing a little bit in the front.